KP6A-MAX Enduro Max Bike Bearing 9.53x22.23x6.30/7.94 (3/8x7/8x5/16)

KP6A-MAX Enduro Max Bike Bearing 9.53x22.23x6.30/7.94 (3/8x7/8x5/16)
Zoom  Zoom

This image shows the product type but may not be this exact part.

Brand:  Enduro
Enduro Range:  MAX
Measurement Unit:  Imperial
Inside Diameter:  9.53mm
Outside Diameter:  22.23mm
Width:  6.30/7.94mm
Seals or Shields:  Rubber Seals
Clearance:  Standard



Our Price:  £10.50(Exc. 20% VAT)(£12.60 Inc. VAT)
  (3 Reviews)


KP6A-MAX Enduro Max Bike Bearing 9.53x22.23x6.30/7.94 (3/8x7/8x5/16)

Typical Applications: Frame Pivot Bearings.

Enduro Max Bearings Specification:

Maximum quantity of Grade 10 Chromium Steel Balls:
MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity. No retainer means these bearings have 40 percent more capacity. The balls must be filled by hand, through a precision slot ground into the inner and outer race.

52100 High Carbon Chromium Alloy Races:
Purest alloy steel with the toughness like no other. MAX bearings use CRC Marine Grease, will not wash out or break down under any extreme circumstances. Even salt water will not penetrate or break it down.

LLU Seals:
Two sealing lips on each seal, which ride in a matching groove on the inner race to make a labyrinth seal. The outer sealing lip repels dirt/water while the inner retains grease. These seals essentially form a “hydromatic seal” of grease when in operation, the grease forming a barrier in the groove.

Average Rating (3 Reviews):  
Write a Review and share your opinions!

Whyte T130 suspension bearings
Tuesday, 24 April 2018  | 

These bearings came next day and were exactly as ordered, so full marks to Wych. They are identical to the ones taken out of my wife's T130 and are a bit crumby, to be honest, with rubbish seals. No wonder they needed replacing.

Was this helpful to you?  Yes  /  No

2 of 2 people found this review helpful.

Quality product
Tuesday, 23 May 2017  | 

Good quality product and knowledgable staff

Was this helpful to you?  Yes  /  No

Bike Bearings
Thursday, 4 June 2015  | 

Arrived very promptly and 'did what it said on the tin'.

I will use Wych Bearings again.

Was this helpful to you?  Yes  /  No