6806 LLU MAX Enduro Bike Bearing 30x42x7

6806 LLU MAX Enduro Bike Bearing 30x42x7
Zoom  Zoom

This image shows the product type but may not be this exact part.

Brand:  Enduro
Enduro Range:  MAX
Measurement Unit:  Metric
Inside Diameter:  30.00mm
Outside Diameter:  42.00mm
Width:  7.00mm
Seals or Shields:  Rubber Seals
Clearance:  Standard



Our Price:  £11.70(Exc. 20% VAT)(£14.04 Inc. VAT)
  (5 Reviews)


6806 LLU MAX Enduro Bike Bearing 30x42x7

Typical Applications: Frame Pivot Bearings. Found in Syncross,Race Face and Cannondale Headset

Enduro Max Bearings Specification:

Maximum quantity of Grade 10 Chromium Steel Balls:
MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity. No retainer means these bearings have 35 percent more capacity. The balls must be filled by hand, through a precision slot ground into the inner and outer race.

52100 High Carbon Chromium Alloy Races:
Purest alloy steel with the toughness like no other. MAX bearings use CRC Marine Grease, will not wash out or break down under any extreme circumstances. Even salt water will not penetrate or break it down.

LLU Seals:
Two sealing lips on each seal, which ride in a matching groove on the inner race to make a labyrinth seal. The outer sealing lip repels dirt/water while the inner retains grease. These seals essentially form a “hydromatic seal” of grease when in operation, the grease forming a barrier in the groove.

Average Rating (5 Reviews):  
Write a Review and share your opinions!

Time will tell but appear to be good quality
Wednesday, 30 October 2019  | 

Iíve not got round to fitting these bearings yet in the bottom bracket of my Specialized Fatboy as I managed to revive the old ones again for another month but on the face of it they seem to be really good quality and well sealed only time will tell how well they last compared tor the poorly sealed poorly greased originals.

Was this helpful to you?  Yes  /  No

Monday, 28 September 2015  | 

Have not fitted them yet. However they look a much better quality then the ones I fitted last time. Survice and delivery was spot on.

Was this helpful to you?  Yes  /  No

Monday, 19 January 2015  | 

very good bearing, smooth and no play at all, the outer diameter measured 0.03mm undersize though

Was this helpful to you?  Yes  /  No

Bicycle bottom bracket bearings.
Saturday, 21 June 2014  | 

These bearings were purchased for a Cannondale BB30 bottom bracket. They were reasonably priced and considerably cheaper than the ones offered by my local cycle dealer and have the advantage of being fully specified; the cycle shop[s] seem reluctant to be able to provide this information so one is never quite sure what is being purchased.I chose a standard delivery [£1.50] and they arrived within two days.

Before assembly I prised the grease seal from the race, as they are in my experience rarely well lubricated, to see that they were greased with what looked like a marine grease, which of course is good and is precisely what I use on all BB bearings on all of my bikes. I did add a little extra before fitting to the bike.

I am pleased with the service; thanks.

Stuart Martin.

Was this helpful to you?  Yes  /  No

3 of 3 people found this review helpful.

Excellent Service
Sunday, 15 June 2014  | 

Excellent service, bearings delivered in a couple of days.
Looks like there's a good choice of bearings for all things cycling related.


Also Bought
6902 LLU MAX Enduro Bike Bearing 15x28x7

6902 LLU MAX Enduro Bike Bearing 15x28x7£6.45 ex. VAT  (36)

MH-P22 1-1/4'' Headset Bearing 34.1x46.9x7

MH-P22 1-1/4" Headset Bearing 34.1x46.9x7£11.00 ex. VAT  (8)

6800 LLU MAX Enduro Bike Bearing 10x19x5

6800 LLU MAX Enduro Bike Bearing 10x19x5£4.55 ex. VAT  (7)