6030-2Z SKF Deep Grooved Ball Bearing 150x225x35 Metal Shields

6030-2Z SKF Deep Grooved Ball Bearing 150x225x35 Metal Shields

Deep Groove Ball Bearings are the most common bearing type found in a wide variety of applications. Versatile and robust they are available in a wide range of sizes and options including seals, shields and special clearance for high speed applications. The main types are:

• Open - Bearing without seals or shields, suitable for applications where lubricant will constantly flow through them i.e. gearboxes.
  
• Metal Shields - Bearings fitted with steel shields and lubricated for life.
  
• Rubber Seals - Bearings fitted with steel reinforced rubber contact seals which provide a better seal but add friction so are unsuitable for high speed applications, lubricated for life.
• C3 - Radial internal clearence greater than normal

6030-2Z SKF dimension chart - all dimensions in mm unless indicated.

Inside Dia	Outside Dia	Width	Dynamic Load (kN)	Static Load (kN)	Limiting speed (r/min)
150	225	35	125	125	3000