NUKRE72A SKF Cam Follower 72x28 M24x1.5 thread

NUKRE72A SKF Cam Follower 72x28 M24x1.5 thread
Zoom  Zoom

This image shows the product type but may not be this exact part.

Brand:  SKF
Bearing Type:  NUKRE..A
Outside Diameter:  72.00mm
Width:  28.00mm
Stud Diameter:  28.00mm
Thread:  M24x1.5


Special order, delayed despatch  

Special order, delayed despatch

Our Price:  £133.80(Exc. 20% VAT)(£160.56 Inc. VAT)


NUKRE72A SKF Cam Follower 72x28 M24x1.5 thread

NUKR .. A design cam followers are based on double row, full complement cylindrical roller bearings without an integral flange between the two roller sets. The stud head and pressed-on flange ring guide the outer ring axially via the roller sets. This enables NUKR .. A design cam followers to accommodate relatively heavy axial loads that are induced when operating in an inclined or tilted position. A sheet metal angle ring is pressed into the outer ring shoulder on both sides to form an effective labyrinth seal.

NUKR .. A design cam followers have a recessed hexagon at each end of the stud, to enable the cam follower to be held in place by a hexagonal key (Allen wrench) during mounting. In the centre of each hexagon is a re-lubrication hole for a press-in grease fitting or an adapter from a central lubrication system.

All designs are available with a concentric seat or an eccentric collar on the stud. An eccentric collar, which has a shrink-fit onto the stud, enables less stringent manufacturing position tolerances to be specified for associated components. An eccentric collar is identified by the letter E at the end of the basic designation.

NUKRE72A-SKF dimension chart - all dimensions in mm unless indicated.

dDCBGMax Radial Dynamic Load (kN)Max Radial Static Load (kN)Limiting speed (r/min)

Be the first to Write a Review for this item!