NUKR62A SKF Cam Follower 62x28 M24x1.5 thread

NUKR62A SKF Cam Follower 62x28 M24x1.5 thread
Zoom  Zoom

This image shows the product type but may not be this exact part.

Brand:  SKF
Bearing Type:  NUKR..A
Outside Diameter:  62.00mm
Width:  28.00mm
Stud Diameter:  24.00mm
Thread:  M24x1.5

Availability:  

In stock  

Our Price:  £97.47(Exc. 20% VAT)(£116.96 Inc. VAT)
+

SKF


NUKR62A SKF Cam Follower 62x28 M24x1.5 thread

NUKR .. A design cam followers are based on double row, full complement cylindrical roller bearings without an integral flange between the two roller sets. The stud head and pressed-on flange ring guide the outer ring axially via the roller sets. This enables NUKR .. A design cam followers to accommodate relatively heavy axial loads that are induced when operating in an inclined or tilted position. A sheet metal angle ring is pressed into the outer ring shoulder on both sides to form an effective labyrinth seal.

NUKR .. A design cam followers have a recessed hexagon at each end of the stud, to enable the cam follower to be held in place by a hexagonal key (Allen wrench) during mounting. In the centre of each hexagon is a re-lubrication hole for a press-in grease fitting or an adapter from a central lubrication system.

All designs are available with a concentric seat or an eccentric collar on the stud. An eccentric collar, which has a shrink-fit onto the stud, enables less stringent manufacturing position tolerances to be specified for associated components. An eccentric collar is identified by the letter E at the end of the basic designation.

NUKR62A-SKF dimension chart - all dimensions in mm unless indicated.

dDCBGMax Radial Dynamic Load (kN)Max Radial Static Load (kN)Limiting speed (r/min)
24622880M24x1.525362600

Be the first to Write a Review for this item!