608 LLU MAX-EE Extended Inner Enduro Bike Bearing 8x22x7/10

608 LLU MAX-EE Extended Inner Enduro Bike Bearing 8x22x7/10
Zoom  Zoom

Brand:  Enduro
Enduro Range  MAX
Measurement Unit  Metric
Inside Diameter  8.00mm
Outside Diameter  22.00mm
Width  7/10mm
Seals or Shields  Rubber Seals
Clearance  Standard

Availability  

Delayed despatch  

Delayed despatch

Our Price:  £9.16(Exc. 20% VAT)(£10.99 Inc. VAT)
+

Enduro


608 LLU MAX-EE Extended Inner Enduro Bike Bearing 8x22x7/10 - Extended inner race both sides.

Typical Applications: Frame Pivot Bearings.

Enduro Max Bearings Specification:

Maximum quantity of Grade 10 Chromium Steel Balls:
MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity. No retainer means these bearings have 35 percent more capacity. The balls must be filled by hand, through a precision slot ground into the inner and outer race.

52100 High Carbon Chromium Alloy Races:
Purest alloy steel with the toughness like no other. MAX bearings use CRC Marine Grease, will not wash out or break down under any extreme circumstances. Even salt water will not penetrate or break it down.

LLU Seals:
Two sealing lips on each seal, which ride in a matching groove on the inner race to make a labyrinth seal. The outer sealing lip repels dirt/water while the inner retains grease. These seals essentially form a “hydromatic seal” of grease when in operation, the grease forming a barrier in the groove.

Be the first to Write a Review for this item!


Related Products
Also Bought